Skip to main content Skip to search Skip to main navigation

Beechcraft B24R and C24R

News

Atting, February 2025 • MT-Propeller Entwicklung GmbH has received the EASA STC 10086373 for the installation of the 3-blade constant speed Propeller MTV-12-B/188-59( ) on the Beech B24R and C24R powered by a Textron Lycoming IO-360-A1B engine. The FAA STC is in progress.



A new EASA STC allows for the installation of MT Propeller’s 3-blade constant speed Prop on the Beech B24R and C24R.

MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:

Best vibration damping characteristics for almost vibration free propeller operations

Bonded on stainless steel leading edge for best erosion protection on the blades

Up to 7 kg (15 lbs) less weight than the original propeller

Unlimited blade life

Increased ground clearance for less blade tip erosion

FOD repairable blades

About MT-Propeller



MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.

Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 33 000 propeller systems with more than 115 000 blades are in service. 180 Million fleet hours where already performed on MT-Propellers.

With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.

A factory certified network of 62 service centers, provides best service and maintenance all over the world.

MT-PROPELLER Entwicklung GmbH
Airport Straubing-Wallmuehle
D-94348 Atting - Germany
phone: +49-(0)9429-9409-0
fax: +49-(0)9429-8432
sales@mt-propeller.com
www.mt-propeller.com
More news from this category

EASA STC for Beech B23 and C23 with 3-blade MT-Propeller MTV-18

Atting, August 2025 - MT-Propeller Entwicklung GmbH received the EASA STC 10086864 for the installation of the 3-blade natural composite propeller MTV-18-B/183-59( ) on the Beech B23 and C23 powered by a Lycoming O-360-A2G (B23) or O-360-A2G, -A4G, -A4J, -A4K (C23).

read now

Proposed Restricted Area along almost the entire Danish Border to Germany

The Danish CAA is proposing a restricted area along almost the entire Danish land-border with Germany. The purpose is for the police to patrol the border by drone, but the consequences are severe operational restrictions on two Danish airfields and problems for VFR traffic to fly across the border into Denmark.

read now

3-blade MT-Propeller on Piper Pa-28-235/236 approved

Atting, August 2025 - MT-Propeller Entwicklung GmbH received the Revision of the EASA STC 10062339 R1 for the installation of the 3-blade propeller MTV-9-B/198-52 on the Piper PA-28-235 and PA-28-236 powered by the engines Lycoming O-540-B1B5 or Lycoming O-540-B4B5 (PA-28-235) and Lycoming O-540-J3A5D (PA-28-236).

read now

more News